UV400 Multipurpose UV Light Mattress Cleaner Bed Beater, Fabric Sanitizer & Vacuum Cleaner

Useful tips

Operating Instruction

1. Insert the hand held cleaner into the UV unit head and, when it is in place, press the button on the back of the vacuum cleaner to make sure this is securely in place
2. Plug the power cable into the socket and turn on the power, then press the power switch button on the handset, the power light and the UV light will come on, and the machine begins to work. Press the power switch again to turn off.
3. Place the machine on the items to be cleaned (e.g. blankets, sheets, sofas, clothes, etc.). The UV lamp under the dust container in the front of the machine lights up, indicating that the UV lamp has started to work and then move the machine forwards and backwards slowly to clean the items. Do not raise the unit from the surface as this will turn the UV off for your protection. The recommended cleaning time is no less than 20 seconds per metre, backwards and forwards three times.
4. If you need to use the vibrator function, you can press the vibrator switch above the UV head. Vibrator function is only operational with main power switch on but vibrator switch can also be turned off.

Handheld vacuum cleaner operating instructions:

1. This product has a UV mite vacuum cleaner and handheld vacuum cleaner combo function, when using the product as a handheld vacuum cleaner, hold by the handle of the UV unit. Press the button at the bottom of the machine handle to release the main unit, lift upwards from the base, until the connection in the base is released from the pad, this can then be used as an independent handheld vacuum cleaner. Select and install one of the small accessories into the portable vacuum cleaner suction inlet, then the handheld vacuum cleaner can operate.
2. Insert the special adaptor at the front of handheld vacuum cleaner inlet, then install one of the various accessories supplied. Extension tubes are supplied for use for area difficult to reach. Now you can use to clean items like floors, furniture, curtains and other objects.

Sleep enhancer/ disc assembly / use

1. To enhance your sleeping experience Ewbank lavender sleep enhancer cards are available for your UVEE. Lavender is accepted as helping the body to relax and we have specially designed cartridges to deliver the aroma of lavender whilst cleaning. Simply remove the lavender sleep enhancer card from the plastic sleeve and insert as directed into the plastic basket filter before refitting the assembled dust chamber.
2. We recommend washing your hands after handling the sleep enhancer cards. Replacement lavender cartridges are available to purchase.

Cleaning your mattress with the UVEE

The age of your mattress determines how often you need to use your UVEE. The cleaning routine below is recommended to produce the best results.

• New mattress – use the UVEE once a month
• Used mattress – use the UVEE daily for the first week and then once a month.

If cleaning a double bed only attempt to clean one side at a time. Position the UVEE flat on the mattress, switch the UVEE on and move the unit following either pattern A or B to cover and clean the whole mattress.  Keep the UVEE flat on the surface and ensure you move the UVEE smoothly and steadily as you would with a household vacuum

Cleaning and Maintenance of the UVEE

Regularly clean the HEPA filter, because the collection of dust mites into the filter may not always kill them, and they may continue to breed. In order to avoid secondary pollution, please clean the HEPA filter and re-use after drying, or replace a new HEPA filter.

1. Turn off the machine and unplug the power cable
2. Remove the dust container
3. Hold the dust container and pull out the filter assembly as indicated by the arrow
4. Hold the filter following the illustration below, rotate the HEPA assembly in the unlocking direction, and then take the HEPA assembly outwards to clean the dust. The HEPA filter is suitable for hand washing in water, but must be completely dry before re-use. Install the filter assembly by aligning the symbols and rotate the filter to lock in place.

5. Clean or replace the UV lamp

• Although the penetration of ultraviolet light is strong, dust, or stains on the tube will have a direct impact on UV lamp’s penetration ability. The quartz lamp should be regularly cleaned, so the performance will not be affected.
• First, make sure the machine is turned off, then turn the machine over, remove the screw with a cross screwdriver, then open the UV lamp cover and remove the UV lamp assembly (with lamp holder).
• After the UV lamp assembly is removed, pinch the lamp head as shown, and remove the lamp from the lamp holder. Similarly, remove the other end. The lamp is a fragile part and needs to be carefully cleaned after removing the lamp.
• After the lamp is wiped clean or a new lamp is being inserted, then place the lamp into the lamp holder, adjust the length of the cable into the mounting groove carefully replace the UV lamp and secure the lamp cover with a screw.

6. Cleaning the machine

• Ensure the power cable is unplugged before any routine maintenance, repair or cleaning of the unit.
• Regularly empty the dust chamber and clean the filter to avoid the vacuum cleaner failing.
• Do not use in or near water. The unit is not suitable for cleaning with oil or gasoline. Use only a soft cloth or neutral detergent to wipe clean the outside of the unit. Coil the power cord neatly for storage.
• Keep it in a dry place
• Do not place heavy objects on top of the machine

7. Cleaning and replacing the Exit Filter

• Turn off the machine and unplug the power cable
• Remove the filter by pulling the tab
• Clean off the dust either with clean dry brush or the filter is suitable for hand washing in warm water but must be completely dry before re-installing.