- 25 minute max. run time
- Dual tank technology
- Clean water tank capacity: 0.6L
- Dirty water tank capacity: 0.5L
- Motorised rotating floor brush
- Suitable for use on all sealed hard floors
- Digital touch controls
- BOOST clean mode
- 3 – 4 hour charge time
- Effective with cold and warm water
- You cannot add "HYDROH1 2-in-1 Cordless Wet Dry Vacuum Cleaner & Hard Floor Cleaner" to the basket because the product is out of stock.
HYDROH1 2-in-1 Cordless Wet Dry Vacuum Cleaner & Hard Floor Cleaner
£179.99
Out of stock
Out of stock
- Description
- Additional information
- Video
- Specification
- Troubleshooting
- Safety Instructions
- Assembly Instructions
- Useful Tips
- Instruction Manual
- Reviews (0)
Description
Additional information
Weight | 3.8 kg |
---|---|
Dimensions | 25 × 26 × 11 cm |
Brand | Ewbank |
Colour | Red/Black |
GTIN | 5016368078471 |
Material | Metal/Plastic |
MPN | EW3060 |
Video
Specification
Battery | 22.2V li-ion |
Brand | Ewbank |
Capacity | 500ml, 600ml |
Clean time | 25 mins Run time |
Colour | Red |
Country of origin | China |
Dimensions (HxWxD) | 112 x 27 x 26 cm |
GTIN | 5016368078471 |
Model Number | EW3060 |
Power/Battery | 120 Watts |
Weight | 3.84 Kg |
Troubleshooting
Problem | Possible Causes | Solutions/Tips |
Solid red right | Device overheating | Let your device cool down before using |
The light flashes alternatively blue and red | Defective product | Please contact our customer service team |
Loss of suction power | Brush malfunction | Make sure brush roll and brush roll cover installed correctly, clean brush roll and debris channel |
The sponge for pre-filter is dirty | Clean the pre-filter | |
The DWT has picked up maximum amount of dirty water and has reached MAX line | Empty the dirty water then reinstall the DWT | |
Brush cover is not latched in place | Reinstall brush cover | |
The debris channel or the airway is blocked | Remove blockages | |
Machine makes unusual noises during normal usage | The debris channel or the airway is blocked | Remove blockages |
The DWT has picked up maximum amount of dirty water and has reached MAX line | Empty the dirty water then reinstall the DWT | |
Machine won’t charge | The external charger cord not correctly plugged | Unplug the charger, then plug again into the machine and then into the wall outlet |
Machine won’t spray | The CWT may be empty | Refill CWT |
The CWT may not be installed correctly | Install the CWT correctly |
Air outlet cover is leaking water | Then floater or the sponge for pre-filter may not be installed | Install the floater and the sponge correctly |
The DWT has picked up maximum amount of dirty water and has reached MAX line | Empty the dirty water then reinstall the DWT | |
The sponge for Pre-filter is moist | Let the sponge dry out | |
The floater is blocked | Remove blockages |
Safety Instructions
- Use only as described in this manual. Use only manufacturer’s recommended attachments.
- Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center.
- Do not handle charger, including charger plug, and charger terminals with wet hands.
- Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow.
- Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
- Use extra care when cleaning on stairs.
- Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
- Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
- Do not use without filter.
- Prevent unintentional starting. Ensure the switch is in the off-position before picking up or carrying the appliance. Carrying the appliance with your finger on the switch or energizing appliance that have the switch on invites accidents.
- Always switch off the appliance before making any adjustments, changing accessories, or storing appliance. Such preventive safety measures reduce the risk of starting the appliance accidentally.
- Recharge only with the charger specified by Ewbank. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
- Use appliances only with specifically designated Ewbank battery packs. Use of any other battery packs may create a risk of injury and fire.
- Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
- Do not use a battery pack or appliance that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury.
- Do not expose a battery pack or appliance to fire or excessive temperature. Exposure to fire or temperature above 130°C may cause explosion.
- Follow all charging instructions and do not charge the battery pack or appliance outside of the temperature range specified in the instructions. Charging improperly or at temperatures outside of the specified range may damage the battery and increase the risk of fire.
- Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.
- Do not modify or attempt to repair the appliance or the battery pack except as indicated in the instructions for use and care.
- Always turn off this appliance before connecting or disconnecting motorized nozzle.
- Do not charge or store the appliance outdoors or inside the car. Only charge, store or use the battery in a dry indoor area where the temperature is higher than 4°C but lower than 40°C. The charger is for indoor use only.
- Do not use to pick up ultrafine particles, such as lime, cement, sawdust, gypsum powder, or ashes.
- Do not use to pick up sharp objects, such as metallic nails, pieces of glass, metal paper clips, or pins.
- Do not use to pick up hazardous material and chemicals, such as solvent, drain cleaner, strong acids or strong alkali.
- Stop using immediately if the machine is overheating, making unusual noises, issuing unusual odor, performing low suction, or leaks electricity.
- Turn cleaner OFF and disconnect from electrical outlet in case of long-term storage.
- Always clean dirty water tank after each use to avoid potential blockage, which may result to low suction power, motor overheating or reduce the service life.
- Store appropriately indoors in a dry place after use.
- Do not place or submerge machine in standing water or try to clean flooded areas.
- All date and technical instruction of this manual based on results from lab tests of Ewbank or designated third party. The company reserves all rights for final explanation.
- Do not use the appliance when the water depth is more than 5mm above the surface.
Assembly Instructions
Handle Assembly
To assemble the handle, insert it into the unit base until you hear a click.
To disassemble the handle, first remove the screw with screwdriver, then press the spring located with a tool to release the handle. Lift the released handle from the unit.
Useful Tips
Clean Water Tank (CWT)
• Make sure that you use warm tap water (60oC max) when filling the CWT.
• For deep cleans add one bottle cap of floor cleaning solution to the CWT.
• To prevent leakage during cleaning DO NOT fill the CWT beyond the MAX line.
Dirty Water Tank (DWT)
• When you hear a tone change in the sound of the motor you need to turn off the appliance immediately and empty the DWT to prevent water leakage. If you are using the appliance for large jobs, then ensure you empty the DWT regularly.
• To maintain performance, it is recommended that you clean the components regularly.
• For optimal performance and preventing odours, always clean and dry the DWT, floater, filters, pre-filter, brush roll, brush roll cover after each use.
• After performing maintenance, place the appliance back on the storage tray vertically. Do not expose machine to direct sunlight and store it appropriately indoors in a dry place.
• When dirty water reaches MAX line, the floater will block off your DWT creating a high-pitched sound indicating it’s time to switch OFF the appliance. Once the appliance is turned off pull up the tank lid to empty the DWT. Use 2-in-1 cleaning tool to remove remaining debris. Rinse the inside of the dirty water tank.
Filter and Floater
• If the filter and the floater in the DWT have been blocked, rinse with water. Take off the filter from the tank lid, pull out the floater, and rinse them with water.
Brush Roll Self-Cleaning
• For optimal performance, use quick self-cleaning function as often as needed.
• Please empty the DWT before and after self-cleaning.
Brush Roll Cover
• For optimal performance, please clean the brush roll cover periodically.
For full details on the usage and maintenance required for the HYDROH1 as well as troubleshooting tips please refer to the instruction manual provided with the product.
Instruction Manual
Download the Instruction Manual for HYDROH1 2-in-1 Cordless Wet Dry Vacuum Cleaner & Hard Floor Cleaner by clicking the pdf link below. If you have any issues or questions not answered by the instruction manual, please contact our customer support here.
You must be logged in to post a review.
Reviews
There are no reviews yet.